Choppers en chopperparts
For Michel, our customer from the Early Shovel Freestyle Chopper, we continued working on the springer front fork. After some time working on the design, this has become the result.
The springer is equipped with ribbed triple trees and we have fitted the front and rear fork with sleeves. The front fork part naturally runs with round shapes to the springs. The whole is completed with a Tillerbar handlebar (formerly a Swedish handlebar).
This chopper is 90% ready to go. With a 2002 block, Retro Springer, 21″ front wheel and a little bit of imagination this can be your dream.
Because of the nice weather, precio the venta € 7.950.-
A customer with a Zero Style Chopper had a handlebar that looked kind of sporty and to stay in this style. After he had been driving around for several years, it was time for this handlebar to give it a Vintage look.
For a project where the theme of rib and brass is a must, we have chosen for a primary case with ribs from the 1989-2006.
To give the project an L&L style look, we used a brass gauge glass.
This is another nice build of an attacKIT frame. To enter the 70’s we’ve used a chopper with a standard fork. The sissy bar with King and Queen saddle gives you that a seventies feeling and with a cheerful fishtail that makes it complete. In the attic we still have a whole lot of 70 years of handlebars.
It is not old and it is not new, but a style that remains popular over the years. Trends come and go but with the Gooseneck you can go in all directions and is not only suitable for a 70s style.
It’s also suitable for a mix of styles, the Retro Springer, Early Shovel, Sportster block, you name it we make it!
The TwinCam is a block that was born in the year 2000. We are now 18 years further so it is logical that this block is now also used for a different design and style.
We have a TwinCam Hardtail frame for a Bobberstyle, an Old Skool and everything in between.
Customer René was already driving his Hardtail Buell around for a while and thought it was time for the annual change to his motorcycle.
This time we were allowed to change the exhausts from open and loud to a race look. The cornering had to be a bit wild with race silencers. See the result here!
We are currently working on a Boardtracker and we’re using a springer for that. To give it its own style, we have opted for a Homemade one!
After having built a lot of bikes, this is the most used jiffy. Ideal with a weldable attachment and held in place with a ball and an extra thick spring, all made in Holland.
We have them in various versions.
Visible on the photo (FLTR): Rough with holes, rough without holes (€ 195,-), black, chrome, mat chrome, brass and gray chrome.
We hung the sportster engine in a Softail and with it we made a traditional bobber with ribbed items.
The rear fender has been designed with a rib and wip, an oval oil tank with rib, a ribbed camcover and a primary box.
The tank has a knucklehead shape with a rib.
This vintage headlight is made from a piece of aluminum. With a yellow lens it’s something to look at!
The retro springer of the forties has been used for a long time because of its nostalgic appearance.
But because we are always looking for innovations, for customer Rino we’ve combined the retro springer with it’s own look.
Hardtail frame with special rear axle plates according to the customer’s wishes.
Customer Johan wanted to have a motor built and had some specific wishes. See here the result.
For more info and photos: http://www.l-l-choppers.com/ll-photo-gallery/bobber/1600cc-lowrider-for-johan/?lang=en