Stage build for Luc

We’re helping Luc with a part of the stage build.

Parts used:

  • Viking Highneck Hardtailframe  10102L
  • Chrome Retro springer overstock length 30338L
  • Speed wheels 16×200 rear wheel  .21 x120 front wheel  20900L
  • Ribbed rear fender  70714L
  • Saddle plate stainless steel 1501791L
  • Round oil tank with battery tray stainless steel 60608L
  • Wild fuel tank 50543L
  • HM exhausts Luc model

And various other components

Custom Handlebar

For customer Krijn we created a Custom handlebar. We adjusted the brake and clutch levers 1201264SP1201265SP so they can be secured through the handle.

In the levers we have drilled holes and cable are guided through the steering wheel, the handles are made suitable for internal gas 1601402. This is a double bearing implementation.

Frank’s Buell – Photoshop

Frank’s Buell has had a complete metamorphosis. From one extreme, a naked racer, went this American to the other extreme, a chopper! However it hasn’t lost any of its aggressiveness. The hardtail racer with streetfighter look is finished and for this we are in the Brabantse Rijen for Frank’s first ride and photos.

For more info and photos click here: http://www.l-l-choppers.com/ll-photo-gallery/choppers/go-fast/?lang=en

Rood gecoat frame met mat zwart gespoten lak

Brake caliper

The HI-tech 2 piston brake caliper  1101211 with a tailor-made brake plate for a springer. In addition, the black-executed CC springer brake caliper 1101320 ZW

 

L&L Cheap Fatso

The cheapest way to provide your original Harley with a thick fork is by using the Cheap Fatso from L&L. This set, which consists of extra-thick triple trees and bold upper and lower covers, is in fact easy to combine with the standard Harley inner and lower forks. So you retain your original front fork but replaces your original triple trees by ours, including covers.

30820a – Triple trees with covers, sanded
30820b – The set mounted with a 39 mm fork (sportster, dyna, ed ed)
30820c – The fork mounted with a 21“ wheel

Lourens New Seventies

Lourens came with a request to build a highneck chopper. It had to be a big bike with a genuine seventies styling. The base is a L&L hardtail frame with a solid single backbone. In the extremely high triple trees there is a long L&L springer mounted, that will take you back to the times of sex, drugs and rock ‘n’ roll.

Because of reliability many customers want modern Harley-blocks such as the Sportsters, Evo and Twin Cams. However Lourens went completely for the old skool look and the choice was for a characteristic Shovelhead with a kickstart transmission. At L&L we find that really cool to build!

It’s all in the details: the sissy bar has the same angle as the fork. For the tank is elected a Jesse James copy that makes the machine look even higher. The oval tank is chosen from our catalog. A low steering wheel and a set of beautiful spoked wheels makes the look complete. In the rough build Lourens’ highneck looks already great. And after completion?

Please come by to have a look!

Jacques’ Softail

Jacques lives, already for a while now, in South Korea and wanted to build on his motorcycle when he would be on vacation in the Netherlands, but because of the hustle and bustle of the last five years that did not happen. Therefore, are we going  to be building his motor.

It is a softail with a 240 mm rear tire and pullybrake, evo engine and a 5 speed gearbox. We have build a Full Flow-glide (frontfork), and a special tank for him.

Old Skool Sporty for Igor the Italian – Photoshoot

Igor is a customer from Italy with a Dutch mother, that comes in handy to translate his wishes. After going through the parts we could use, this became another great hot rod for the traffic in Italy. And with the use of the minimal parts, it really became a crowd pleaser.

Check the photo’s here: http://www.l-l-choppers.com/ll-photo-gallery/old-school/old-skool-sporty-for-igor-the-italian/?lang=en

Old Skool look met gebruik van standaard wielen
Exit mobile version